manualshive.com logo in svg

Di-soric ID-04, User Manual

Share
Download
Di-soric ID-04 User Manual Download Page 124

6-4

ID-04 Imager User’s Manual

Data Matrix

Data Matrix

ECC 200

ECC 000

ECC 050

Usage:

Very useful where information needs to be packed into a small area, and/

or where symbols need to be applied directly to the substrate with laser 

etching, chemical etching, dot peen, or other methods.

Definition:

Data Matrix is a type of Matrix symbology and has subsets ECC 000 - ECC 

200.
ECC 200 symbols have an even number of rows and an even number of 

columns. Most of the symbols are square with sizes from 10x10 to 

144x144. Some symbols, however, are rectangular, with sizes from 8x18 to 

16x48. All ECC 200 symbols can be recognized by the upper right corner 

module being light (binary 0) instead of dark.

Definition:

When enabled, will decode ECC 200 Data Matrix symbols.

Serial Cmd:

<

K479,

ECC 200 status

,ECC 000 status,ECC 050 status,ECC 080 status, 

ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status

>

Default:

Enabled

Note:

 This is the only symbol type enabled by default.

Options:

0 = Disabled

1 = Enabled

Definition:

When enabled, will decode ECC 000 symbols. 

Serial Cmd:

<

K479,

ECC 200 status,

ECC 000 status

,ECC 050 status,ECC 080 status, 

ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Definition:

When enabled, will decode ECC 050 symbols. 

Serial Cmd:

<

K479,

ECC 200 status,ECC 000 status,

ECC 050 status

,ECC 080 status, 

ECC 100 status,ECC 140 status,ECC 120 status,ECC 130 status

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Summary of Contents for ID-04

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands