Di-soric ID-04 User Manual Download Page 297

Page: 297 / 368

ID-04 Imager User’s Manual

12-5

Terminal

Macros

Macros can be stored in a macro selection bar, edited in a separate window, and executed

by clicking on the macro name.

When you click on the macro name, the macro is executed in the

Terminal

window.

If this is a command, it is sent to the reader at the same time that it is displayed.

Editing a Macro

When you click the arrow next to any macro and select

Edit

, the following appears:

You can edit an existing macro or type in the

Macro Name

text field and define it in the

Macro Value

text field. Click

Click on

Next

Row

to see the

next row of

macros

Click on the first arrow here to see

Add

Macro

Default Macros

When you default macros, the entire

macros set is restored to their original

macro commands.

Click on subsequent

arrows to edit macros.

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands