manualshive.com logo in svg

Di-soric ID-04, User Manual

Share
Download
Di-soric ID-04 User Manual Download Page 127

ID-04 Imager User’s Manual

6-7

Symbologies

Code 39

Check Digit Status (Code 39)

Check Digit Output Status (Code 39)

Usage:

Code 39 

is considered the standard for non-retail 1D symbology.

Definition:

An alphanumeric symbology with unique start/stop code patterns, composed 

of 9 black and white elements per character, of which 3 are wide.

Serial Cmd:

<

K470,

status

,check digit status,check digit output status,large intercharacter 

gap,fixed symbol length status,fixed symbol length,full ASCII set

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Serial Cmd:

<

K470,

status,

check digit status

,check digit output status,large intercharacter 

gap,fixed symbol length status,fixed symbol length,full ASCII set

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Usage:

Check Digit Output Status

, added to the symbol, provides additional 

data security.

Definition:

When enabled, the check digit character is read and compared along with 

the symbol data. When disabled, symbol data is sent without the check 

digit.

Note:

 With 

Check Digit Output Status

 and an 

External

 or 

Serial

 trigger 

option enabled, an invalid check digit calculation will cause a No Read 

message to be transmitted at the end of the read cycle.

Serial Cmd:

<

K470,

status,check digit status,

check digit output status

,large intercharacter 

gap,fixed symbol length status,fixed symbol length,full ASCII set

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Summary of Contents for ID-04

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands