Di-soric ID-04 User Manual Download Page 248

Page: 248 / 368

10-6

ID-04 Imager User’s Manual

Evaluation

Histogram

Note: Since histograms are performed in the Imager, the results will be saved regardless

of whether the image was uploaded as a JPEG (.jpg) or a bitmap (.bmp).

1. From the Evaluation window, click the Histogram button.

The current image is transferred into the histogram operation. This may take a

moment, since all the relevant pixels are being evaluated intensively.

2. When the Histogram window opens, you may need to expand the window and/or

adjust the scroll bars in order to bring the image into view.

3. To generate a histogram, click and drag your cursor diagonally across the symbol or

a portion of the symbol.
The image will be surrounded by an “area of interest box”, a dashed blue line with red

anchor points that can be selected and moved by placing a cursor inside the box, and

can be resized by clicking and dragging the anchor points.

Usage:

Useful in determining quality and contrast of symbols.

Definition:

A histogram is a graphic representation of the numeric count of the

occurrence of each intensity (gray level) in an image. The horizontal axis

represents the values of gray levels, and the vertical axis represents the

number of pixels for each gray level.

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands