Di-soric ID-04 User Manual Download Page 147

Page: 147 / 368

ID-04 Imager User’s Manual

6-27

Symbologies

PDF417

Note:

Sending

<a1>

will cause PDF417 data to be prefaced with information consisting of

error correction level (ECC Level

), number of rows (

Rows), number of columns (

Columns), number of informative code words (

Info Code Words) and the number of data

characters (

Data Characters). This feature can be disabled by re-sending

<a1>

Fixed Symbol Length Status (PDF417)

Fixed Symbol Length (PDF417)

Note: Fixed Symbol Length Status

must be enabled for

Fixed Symbol Length

to take

effect.

Usage:

Used in applications where a large amount of information (over 32 characters)

needs to be encoded within a symbol, typically where the symbol is transported

from one facility to another. For example, an automobile assembly line

might use a single symbol with multiple fields of information that will be

read at several stations along the way, without reference to a database.

Definition:

A two-dimensional, multi-row (3 to 90), continuous, variable length symbology

that has high data capacity for storing up to 2,700 numeric characters, 1800

printable ASCII characters, or 1100 binary characters per symbol. Each

symbol character consists of 4 bars and 4 spaces in a 17-module structure.

Serial Cmd:

K476,

status

,[unused],fixed symbol length status,fixed symbol

length,[unused],codeword collection

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Serial Cmd:

K476,

status,[unused],

fixed symbol length status

,fixed symbol

length,[unused],codeword collection

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Usage:

Used to increase data integrity by ensuring that only one symbol length

will be accepted.

Definition:

When enabled, the PDF symbol must contain the same number of characters

as the symbol length setting before it can be considered a good read. The

Imager will ignore any symbol not having the specified length.

Serial Cmd:

K476,

status,[unused],fixed symbol length status,

fixed symbol

length

,[unused],codeword collection

Default:

Options:

1 to 2710

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands