Di-soric ID-04 User Manual Download Page 99

Page: 99 / 368

ID-04 Imager User’s Manual

5-5

Read Cycle

Multisymbol

Number of Symbols

Multisymbol Separator

Note:

The ASCII characters

, and

can only be entered as hex pairs:

For

<K222h,,3C>

For

<K222h,,3E>

For

<K222h,,2C>

See

ASCII Character Entry Modifier

for a more detailed explanation of how

to enter ASCII characters as hex values.

Note:

If No Read messages are disabled and there are No Reads occurring, separators

will only be inserted between symbol data outputs.

Usage:

Multisymbol is commonly used in shipping applications where a shipping

symbol contains individual symbols for part number, quantity, etc. This

feature allows on trigger to pick up all the symbols.

Definition:

Multisymbol

allows the user to define up to 100 symbols that can be read

in a single read cycle.

Conditions:

The following conditions apply:

• Each symbol must be different to be read, unless in

Rapid Capture

Mode

, configured for “triggered capture”.

• The maximum number of characters in a read cycle is 3,000 for all

symbols.

• All No Read messages are posted at the end of the data string, unless

output filtering is enabled.

• If more than one symbol is within the field of view at the same time,

symbol data may not be displayed in the order of appearance.

• If

Matchcode Type

is set to

Sequential

or if

Trigger

is set to

Continuous

Read 1 Output

, the Imager will behave as if

Number of Symbols

were

set to

, regardless of the user-defined configuration.

Definition:

Number of Symbols

is the number of different symbols that can be read in

a single read cycle.

Serial Cmd:

K222,

number of symbols

, multisymbol separator

Default:

Options:

1 to 100

Usage:

Used to delimit or separate data fields with a user defined character.

Definition:

Any valid ASCII character, inserted between each symbol read when Multisymbol

is set to any number greater than 1.

Serial Cmd:

K222,

number of symbols,

multisymbol separator

Default:

(comma)

Options:

Any available ASCII character.

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Brands by name

Popular brands