Di-soric ID-04 User Manual Download Page 298

Page: 298 / 368

12-6

ID-04 Imager User’s Manual

Terminal Window Menus

Terminal Window Menus

Right-click on the

Terminal

window to display the following menu:

Terminal Dropdown Menu

The dropdown

Terminal

menu has

Capture Text

Save Current Text

Send File

Find

Next

, and

Find Previous

functions, as well as the same functions defined above.

•

Copy

selected text to clipboard.

•

Paste

from Terminal or other text.

•

Clear

all text in Terminal window.

•

Select All

text in the Terminal window.

•

Save...

brings up a

Save As

dialog.

•

Change Font...

of text in Terminal; brings up a

Font

dialog.

•

Change Echo Font...

to change typed text; brings up a

Font

dialog.

•

Enable Echo

enables Echo text (typed by user).

•

Change Background Color

of Terminal window.

•

Non-Printable Characters

allows you to hide non-printable

characters, or to show them in

Standard

Enhanced

format.

•

Default Settings

returns all the above settings to default.

•

Keyboard Macros

allows you to create new keyboard macro

commands that can be sent from function keys (F2, F4, F5, etc.)

•

Capture Text...

lets you append data in real time to a

text file of your choice. While in operation, the text file

cannot be opened. You can select Pause to interrupt

the capture flow or Stop to end the flow and open the

file.

•

Save Current Text...

saves all text in the Terminal

window to a text file.

•

Send File

allows you to browse for specific files and

send them to the reader.

•

Find Next

searches for a user-defined section of text

in the Terminal.

•

Find Previous

operates in the same way as Find

Next, but searches backward through Terminal text.

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands