manualshive.com logo in svg

Di-soric ID-04, User Manual

Share
Download
Di-soric ID-04 User Manual Download Page 314

13-16

ID-04 Imager User’s Manual

Firmware

Request Checksum

You can send a request to the Imager for part numbers, checksums, boot code, and 

application code.

By di-soric ID

You can access 

Checksum

 from the 

Utilities

 menu.

1. Click the 

Firmware

 tab.

2. From the pulldown selection box to the left of the 

Request Checksum

 button, make 

your selection.

3. Select the code type to see its checksum displayed in the text field to the right of the 

Request Checksum

 button.

By Serial Command

• When you send 

<!>

 (a request for all available firmware checksums), the Imager returns: 

<!b/BOOT_CHECKSUM><!a/APP_CHECKSUM><!p/PROFILE_CHECKSUM>

• When you send 

<!a>

 (a request for the application code checksum), the Imager returns: 

<!a/APP_CHECKSUM>

• When you send 

<!b>

 (a request for the boot code checksum), the Imager returns: 

<!b/BOOT_CHECKSUM>

• When you send 

<!p>

 (a request for profile module checksum), the Imager returns:

<!p/PROFILE_CHECKSUM>

Summary of Contents for ID-04

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands