Di-soric ID-04 User Manual Download Page 130

Page: 130 / 368

6-10

ID-04 Imager User’s Manual

Code 128 / EAN 128

Code 128 / EAN 128

Fixed Symbol Length Status (Code 128 / EAN 128)

Fixed Symbol Length (Code 128 / EAN 128)

Usage:

Code 128

is a smaller symbology useful in applications with tight spots

and high security needs.

Definition:

A very dense alphanumeric symbology. It encodes all 128 ASCII characters,

it is continuous, has variable length, and uses multiple element widths

measured edge to edge.

Serial Cmd:

K474,

status

,fixed symbol length status,fixed symbol length,EAN 128 status,

output format,application record separator status,application record separator

character,application record brackets,application record padding

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Definition:

When enabled, the Imager will check the symbol length against the symbol

length field. If disabled, any length will be considered a valid symbol.

Serial Cmd:

K474,

status,

fixed symbol length status

,fixed symbol length,EAN 128

status,output format,application record separator status,application record

separator character,application record brackets,application record padding

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Usage:

Fixed Symbol Length

helps prevent truncations and increases data

integrity by ensuring that only one symbol length will be accepted.

Definition:

This specifies the exact number of characters that the Imager will recognize

(this does not include start, stop, and check digit characters). The Imager

ignores any symbol not having the specified length.

Serial Cmd:

K474,

status,fixed symbol length status,

fixed symbol length

,EAN 128

status,output format,application record separator status,application record

separator character,application record brackets,application record padding

Default:

Options:

1 to 64

Summary of Contents for ID-04

















































































































































































































































































































































































Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands

Di-soric ID-04, User Manual

Search results

Summary of Contents for ID-04

Reviews:

Related manuals for ID-04

Brands by name

Popular brands