Page 73 of 87
DGH 55B-INS-OMENG Rev: 3
15.7.5
The
Pachmate 2
will begin connecting to the PC
and display the message ‘Connecting To BT
Device’.
NOTE:
If there are no measurements stored in the device, the
Pachmate 2
will not attempt to
connect. It will display the message ‘No Measurements To Transfer!’
15.7.6
Once connected, the
Pachmate 2
will display
‘Bluetooth Connected’ and will transfer
measurements to the PC automatically.
NOTE:
If the incorrect incoming COM Port is selected, the
Pachmate 2
will not be able to
initiate measurement transfer. To correct this error:
15.7.6a
Select Settings → COM Settings.
15.7.6b
When the Settings dialog box opens,
change the port by going to the Incoming
Port selection box and choosing a different
COM Port from the list. The computer
will automatically save the new COM Port
configuration.
15.7.6c
If this error occurs again, select another COM
Port and attempt another import.
15.7.7
Once all files are transferred, the device will
automatically disconnect and show the ‘Bluetooth
Disconnected’ message.
Connecting to
BT Device
Bluetooth
Connected
Bluetooth
Disconnected
