Page 30 of 87
DGH 55B-INS-OMENG Rev: 3
10.3
Changing Patient Modes
10.3.1
By default, the
Pachmate 2
is in Single Patient
Mode upon power up. To confirm that the device
is in Single Patient Mode, press the CFG key and
the device will display the ‘Select Patient’ screen
with ‘-- Single --‘ selected:
•
If Single Patient Mode is preferred, press the CFG key to exit the menu.
10.3.2
Pressing the
or
key will scroll through the ‘Select Patient’ menu. Available patient
locations are indicated by a number (P01-P20) on the bottom left-hand side of the screen.
•
If the patient location is empty, there will be a
‘--No Data--‘ message.
•
If the patient location contains recorded
measurements, there will be a ‘-Meas Only-’
message.
•
If the location contains patient ID information
(See 15.5 for instruction on entering patient
ID)
the device will show the patient name. By
pressing the OD or OS key while the patient’s
name is displayed, other identifying
information will be displayed.
SELECT PATIENT
-- Single --
SELECT PATIENT
P01 --No Data--
SELECT PATIENT
P02 -Meas Only-
SELECT PATIENT
P03 C. Doe
SELECT PATIENT
P03 Mar-03-1973
SELECT PATIENT
P03 #30453
SELECT PATIENT
P03 Male
