DGH DGH 55B Operator'S Manual Download Page 51

Page: 51 / 87

Page 51 of 87

DGH 55B-INS-OMENG Rev: 3

13.5

Bluetooth

Parameters

These are the Bluetooth

operation parameters. If the

Pachmate 2

has a Bluetooth

module

installed, they will be accessible when the Bluetooth

parameter is enabled. Only Devices with a

Bluetooth

Wireless Technology Logo printed on the front have a module installed.

NOTE:

To access these parameters, enter the Configuration Menu by pressing the CFG key.

Press the ENT key repeatedly to navigate through the menu. See section 13.1

13.5.1

Bluetooth

(default On) determines if the

Bluetooth

module is enabled or disabled. This

must be set to ‘On’ to connect devices or transfer

files. Press the

key to change the value.

•

When the Bluetooth

wireless module is enabled, a logo will appear in the upper left-

hand corner.

13.5.2

Send Meas To

determines which device the

Pachmate 2

will transmit records to. If there are no

devices paired with the

Pachmate 2

, the screen will

display ‘---None---‘.

•

If the

Pachmate 2

is paired to one or more

devices, the screen will display:

NAME is the name of the device that will
receive the records.

is the list number of the device shown.

is the total number of devices paired with the

Pachmate 2

. Up to 5 devices can

be paired at a time.

Send → indicates that pressing the OD key will cause the

Pachmate 2

to transmit

measurements to the currently displayed device.

13.5.3

When

Add PC/Printer

is displayed, the device is

in Bluetooth

discoverable mode. This is a

necessary mode for pairing Bluetooth

devices. See

section 14 for information on device pairing.

BLUETOOTH

SEND MEAS TO 0/0

--- None ---

SEND MEAS TO #

##NAME## Send

→

ADD PC/PRINTER

Scan

→

Summary of Contents for DGH 55B
























































































Search results

Summary of Contents for DGH 55B

Reviews:

Related manuals for DGH 55B

Brands by name

Popular brands

DGH DGH 55B, Operator'S Manual

Search results

Summary of Contents for DGH 55B

Reviews:

Related manuals for DGH 55B

Brands by name

Popular brands