DGH DGH 55B Operator'S Manual Download Page 53

Page: 53 / 87

Page 53 of 87

DGH 55B-INS-OMENG Rev: 3

14.

Configuring Bluetooth

Connections

Bluetooth

wireless features can only be enabled if your device has an optional Bluetooth

module installed. Only Devices with a Bluetooth

Wireless Technology Logo printed on the

front (in the bottom left-hand corner) have a module installed.

14.1

Enabling Bluetooth

14.1.1

To turn on the Bluetooth

wireless module, press

the CFG key, then press the ENT one time to
navigate to the Bluetooth parameter and set it to
‘On’ using the or key.

14.1.2

Press the CFG key to exit the Configuration menu

and press the

key to select ‘Yes’ when prompted

to save the configuration. The

Pachmate 2

will

return to

Measurement Mode

14.1.3

An icon will appear in the upper left-hand corner to
indicate that the Bluetooth

module is enabled.

14.2

Pairing with a Bluetooth

enabled printer

The

Pachmate 2

can be paired directly to a Bluetooth

enabled printer. Once paired, the

operator can print measurements directly from the device, without the need for a PC.

14.2.1

Turn on the printer and put it in the discoverable mode. Refer to the printer’s user manual
for instructions on using the printer’s Bluetooth

features.

14.2.2

Turn on the

Pachmate 2

and enter the Configuration Menu by pressing the CFG key.

14.2.3

Press the ENT key one time to navigate to the ‘Bluetooth’ parameter. Confirm that it is
turned ‘On’. If not, press the or key to enable Bluetooth. (See Section 14.1)

BLUETOOTH

Save New Config?

↑

=Yes

↓

=No

Avg 0: 0



Std Dv: 0.0



Summary of Contents for DGH 55B
























































































Search results

Summary of Contents for DGH 55B

Reviews:

Brands by name

Popular brands

DGH DGH 55B, Operator'S Manual

Search results

Summary of Contents for DGH 55B

Reviews:

Brands by name

Popular brands