DGH DGH 55B Operator'S Manual Download Page 63

Page: 63 / 87

Page 63 of 87

DGH 55B-INS-OMENG Rev: 3

15.

DGH Connect Software

The DGH Connect Software is an application that allows the operator to use a Windows-based
PC to communicate with DGH devices. This software will interact with

Pachette 4

and

Pachmate 2

devices.

To utilize DGH Connect, the PC must first be paired with the

Pachmate 2

. For information on

pairing refer to section 14.4.

15.1

Software Requirements

15.1.1

System Requirements

•

Processor:

32-bit or 64-bit, 2 GHz

•

Memory:

2 GB RAM

•

Hard Drive:

1 GB minimum, 100 GB recommended

•

Ports:

USB 2.0

•

Display:

1024 x 768 resolution

•

Peripherals:

Mouse (or Touchpad), Keyboard

•

Bluetooth

Radio: v2.1 or later*

•

* Software is compatible with USB Bluetooth

adapters/dongles for desktop systems.

15.1.2

Compatible Operating Systems

•

Microsoft Windows XP, Service Pack 3 or higher (32-bit)

•

Microsoft Windows Vista, Service Pack 2 or higher (32-bit or 64-bit)

•

Microsoft Windows 7 (32-bit or 64-bit)

•

Microsoft Windows 8/8.1 (32-bit or 64-bit)

WARNING:

Using “Non-Essential” software in conjunction with the DGH Connect

software could have unknown / adverse Impact on the operation of the software and is

therefore not recommended.

WARNING:

Due to the threat of computer viruses, it is recommended that an anti-virus

program be installed on the computer running the DGH Connect software.

Summary of Contents for DGH 55B
























































































Search results

Summary of Contents for DGH 55B

Reviews:

Brands by name

Popular brands

DGH DGH 55B, Operator'S Manual

Search results

Summary of Contents for DGH 55B

Reviews:

Brands by name

Popular brands