manualshive.com logo in svg

DGH DGH 55B, Operator'S Manual

Share
Download
DGH DGH 55B Operator'S Manual Download Page 34

 

Page 34 of 87 

 

DGH 55B-INS-OMENG Rev: 3 

11.2

 

Mapping Measurement Mode 

The 

Pachmate 2

’s other 

Measurement Mode

 option is 

Mapping Mode.

 In this mode the operator is able to take a 

single measurement (not averaged) at various positions on 
the cornea. While in Mapping Measurement Mode the 
screen will display which eye is being measured, the 
mapping position number and the measurement. 
 
 
 
 
The device can also be configured to display an operator 
defined measurement bias while in 

Mapping Measurement 

Mode

. (See section 13.3.2). When biased measurements are 

enabled, the screen will display which eye is being 
measured, the mapping position number, the actual 
measurement and the calculated biased measurement. 
 
 
With 

Mapping Measurement Mode

 enabled, the 

Pachmate 2

 can be programmed to record from 

1 to 33 unique measurement positions. The illustration below shows 33 potential measurement 
points. 

 

 

Fig 11.2.1 Potential Mapping Points 

 
Using multiple measurement points allows the user to “map” the thicknesses of the cornea at 
various locations; however the operator must keep track of which measurement belongs to each 
corneal position. This can be achieved with the help of corneal thickness charts, which are 
available upon request from DGH Technology, Inc. 

 

See section 13.3 for information on configuring 

Mapping

 parameters. 

See section 12.3 for information on taking measurements in 

Mapping Measurement Mode.

 

        OD

 

 

Pos’n 

:   1 

          Meas :   0

 

        OS

 

 

Pos’n 

:   1 

          Meas :   0

 

        OD

 

 Pos   1 : 0

 

          Biased : 0

 

        OS

 

 Pos   1 : 0

 

          Biased : 0

 

Summary of Contents for DGH 55B
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands