DGH DGH 55B Operator'S Manual Download Page 62

Page: 62 / 87

Page 62 of 87

DGH 55B-INS-OMENG Rev: 3

14.8.3

Press the ENT two more times to navigate to ‘Add
PC/Printer’ parameter. Press the OD key to initiate
a scan.

14.8.4

The

Pachmate 2

will populate a list of all

discovered Bluetooth

devices. Use the

and

keys to scroll through the list of available devices.
If the device is paired with the

Pachmate 2

, the message ‘Paired →’ will be displayed.

14.8.5

Press the OD key. The device will show the name
of the paired device and give the option to remove

it. Press the

key to select yes. The device pairing

has been removed.

14.8.6

Press the CFG key to return to Measurement Mode.

14.9

Clearing All Paired Bluetooth

Devices

Occasionally it may be necessary to clear all Bluetooth

pairing settings from the

Pachmate 2

’s

memory to allow connection to new devices.

14.9.1

Press the CLR key. The user will be prompted with
the ‘What To Clear?’ menu. Use the or

key to

scroll through the clearing options until ‘Paired
Devices’ is displayed.

14.9.2

With ‘Paired Devices’ displayed, press the ENT
key. The

Pachmate 2

will clear all Bluetooth

devices pairing information from memory and
display the ‘Paired Devices List Cleared’ message.

14.9.3

The

Pachmate 2

will return to

Measurement Mode

ADD PC/PRINTER

Scan

→

##NAME## #

←

ReScan Paired

→

##NAME##
Remove?

↑

↓

WHAT TO CLEAR?

Paired Devices

PAIRED DEVICES

LIST CLEARED

Summary of Contents for DGH 55B
























































































Search results

Summary of Contents for DGH 55B

Reviews:

Related manuals for DGH 55B

Brands by name

Popular brands

DGH DGH 55B, Operator'S Manual

Search results

Summary of Contents for DGH 55B

Reviews:

Related manuals for DGH 55B

Brands by name

Popular brands