DEUTZ-FAHR CondiMaster 6831, Operation Manual

Page: 9 / 38

7
EN
1.3 Nameplate
The nameplate stating the machine type and serial number is fastened to the bracket on the left.
Note:
Enter the data on the nameplate in the box provided on page 3.
1.4 Application as stipulated
The Rotary Tedder is built solely for use in the field of agricultural work and is intended and suitable for
the processing of blades of grass and haulms which have been mown and are lying on the ground.
Use of the implement for any other purpose is considered as operation which is not in accordance with
specifications and is undertaken as such at the owner’s risk. The manufacturer is not liable for any
resulting damages!
The operation, maintenance and repair work conditions fall under the prescribed application stipulations
laid down by the manufacturer and must be adhered to at all times. The implement may only be operated,
serviced and repaired by personnel who have read and understood these instructions and who have
been thoroughly instructed of the inherent dangers.
All relevant accident prevention regulations, as well as all generally recognized safety, health and
highway regulations, must be complied with.
Attention!
Never carry out changes yourself; otherwise no warranty will be assumed for resulting
damage.
1.5 Liability and warranty
These operating instructions must be read and observed by all personnel who work on or with this
implement. In addition, this implement is to be used solely for the purpose stipulated (see chapt. 1.4).
1.
You may only work with this implement according to the instructions in the valid documentation.
This documentation can be made up of the following instruction manuals:
z Mounting instructions
z Operating instructions
z Supplement pages