22
EN
3.3
Changing over from working to
transport position
1.
Equipment hinged protective yokes and tine arms:
Danger!
Work may only be carried out with the
implement at a standstill! Shut down the
engine and remove the ignition key!
In order to achieve a minimum transport height,
the outer protective yokes as well as two tine arms
on each side (6911) or two tine arms on the l.h.s.
and one tine arm on the r.h.s. (6910) can be
folded in manually. To this end, swivel in the
hinged tine arms and fold up the protective yokes.
(fig. 3-4 / fig. 3-5)
Danger!
Keep clear of the swivel area!
2. Folding in the implement. To this end, set the control
unit to "Raise" until the hooks lock in on both sides
and the cylinder of the chassis is fully extended
(fig. 3-6 / fig. 3-7).
Danger!
Check locking hooks before each journey!
Fig. 3-4
Fig. 3-5
fig. 3-6
Fig. 3-7
Summary of Contents for CondiMaster 6831
