26
EN
3.7
Unhooking from the tractor
There are two possible ways of parking the implement:
either in transport position (fig. 3-16) or in working
position with the chassis lowered (fig. 3-17).
Danger!
Work may only be carried out with the
machine at a standstill! Shut down the
engine and remove the ignition key!
Fig. 3-16
3.6.2 Hydraulic setting for clearing the
edges of the field
When clearing the edges of the field to the right or to
the left, the wheels can be easily adjusted from the
driver's seat by means of a hydraulic double-acting
cylinder (fig. 3-14).
To this end, operate the double-acting control unit whilst
in motion until the implement has achieved the required
angled position. After the edges of the field have been
cleared, straighten up the implement or the wheels in
the same way (fig. 3-15).
Fig. 3-14
Fig. 3-15
Fig. 3-17
Summary of Contents for CondiMaster 6831
