84
●
Integrator Setpoint:
It is used to set threshold to the Integration value (Setpoint) of the analog input to integrate
or totalize.
Limits: from 0 to 99999999 units.
- In
[ConF] [Int ]
in parameter
[P 05]
press Enter and the display will show
[nnnn]
[P 0U]
indicating the Less Significant value
[9999]
of the setpoint, introduce the required value
of this group of digits using
to modify digit by digit. Once the last digit is modified, if
the key
is pressed the display will show
[nnnn]
[P 0S]
indicating the Most Significant
value
[9999]
of the setpoint,
introduce the required value of this group of digits using
and
.
For example:
- To set the
Integrator Setpoint
to 12345678, introduce in
[P 0U]
the value
[5678]
and then
in
[P 0S]
the value
[1234]
. When the Integrator value reaches the setpoint 12345678 the
assigned relay output will be activated.
Relay Output assignement to the Integartor Setpoint:
Assign a physical output (relay or logic) to the Integrator Setpoint.
· Enter in any of the options
[ConF] [do 1]
,
[do 2]
,
[do 3]
or
[do 4]
depending on which output
is going to be used
Slot Y1
,
Y2, Y3
or
Y4
.
· Modify the parameter
[P 02]
of the selected output
Y
, and set the code
[1600]
(assign the
setpoint of
[Int ]
to input C of the Block
[do x]
.
· Check that
[do 1...4] [P 01]
is set to
[0000]
(inputs A and B deactivated).
· Check that
[do 1...4]
are configured as digital output mode, depending on the selected
output:
If
[do 1] or [do 3]
were selected
,
set
[P 04]
to
[???0]
(digital output mode).
If
[do 2] or [do 4]
were selected
,
set
[P 03]
to
[???0]
(digital output mode).
Summary of Contents for HS-7000 Series
