Desin Instruments HS-7000 Series, General Instructions Manual

Page: 22 / 108

22
GENERAL INSTRUCTIONS
INITIAL PRESENTATION ON DISPLAY
When switched-on, the instrument will show the following:
[Self] [tESt]
self-test sequence.
[XXXX] [vErS]
the model identification code.
[XXXX] [rEV] the firmware program version code.
DATA SHOWN ON THE HS-7200 DISPLAY IN NORMAL OPERATION
● When customized as multi-loop Indicator.
The HS-7200 standard version is provided with 3 independent analog inputs AI 1, AI 2 and
AI 3 (or AI S) operating internally as Measuring Loops L1, L2 and L3 and represented,
respectively, by the LEDs L1, L2 and L3.
The loops can be displayed using key in any point in the MAIN MENU.
●
HS-7200. Multivariable Processor 1/8 DIN horizontal format
The instrument is factory programmed as multiloop Indicator. For each enabled loop will show:
- Loop 1 (L1 On) : The value of AI 1, all other functions disabled.
- Loop 2 (L2 On) : the value of AI 2, all other functions disabled.
- Loop 3 (L3 On) : the value of AI 3, all other functions disabled.
NOTE: This configuration of the Menu can be modified at any time using LoopWin software.
STANDARD MENU
The standard factory configuration provides a
basic menu limited to the Alarm and Password
parameters. Any other existing configuration
could has been realized under request:
- To shift the loop press
- To scroll the options of the menu, press
- To go in any option, press
- To modify the value or data of any option of
the menu, keys and are used.
- To exit from any option of the menu, press
When switched-on:
Display: Normal operation Display
Press go to Alarm AL 1 or AL 3 or AL 5
Press go to Alarm AL 2 or AL 4 or AL 6
Press go to Passwords
Press return to Normal Operation Display