Desin Instruments HS-7000 Series, General Instructions Manual

Page: 78 / 108

78
CONFIGURATION OF THE DIGITAL OUTPUTS (RELAYS)
CONFIGURATION OF THE MAIN PARAMETERS OF THE DIGITAL OUTPUTS DO
1..2..3..4:
PROCEDURE TO ASSIGN THE DIGITAL OUTPUTS IN CASE IT WERE NOT ACTIVATED:
AS DIGITAL OUTPUT
- For DO 1..2..3..or..4, in [ConF] [do 1], [do 2], [do 3] or [do 4] in parameter [P 01] check
the code [nn??] or/and [??nn]
If this code indicates [??04] or/and [??04] (not assigned), modify the digits according to
following:
Most common virtual connection codes:
Alarm Outputs AL 1..2..3..4..5..6 [??17], [??18], [??19]
[??20], [??21], [??22]
Timer Outputs tMr 1..2..3..4 [??29], [??30], [??31], [??32]
Logic Operator outputs LOG 1.. a ..6 [??23], [??24], [??25]
[??26], [??27], [??28]
Counter’s Setpoint Output DI 2 [??07]
Integrator’s Setpoint Output Int [??18]
TIME PROPORTIONAL (MODULATOR) OUTPUT
- For DO 1, in [ConF] [do 1] in parameter [P 03] check the code [??nn]
If this code indicates [??04] (not assigned), modify the digits according to the following:
Most common virtual connection codes:
Control output MV value of PID 1, PID 2, PID 3 [??37], [??39], [??41] for reverse
action
[??38], [??40], [??42] for direct action
STEP BY STEP CONTROL OUTPUT (POSITIONER)
- For DO 1, in [ConF] [do 1] in parameter [P 03] check the code [??nn]
If this code indicates [??04] (not assigned), modify the digits according to the following:
Most common virtual connection codes:
Control output MV value of PID 1, PID 2, PID 3 [??37], [??39], [??41] for reverse
action
[??38], [??40], [??42] for direct action
Step by Step Control with Feedback signal
- For DO 1, in [ConF] [do 1] in parameter [P 02] check the code [??nn]
If this code indicates [??04] (not assigned), modify the digits according to the following:
Most common virtual connection codes:
Value of the variable of Input AI 3 [??11] (Feedback external signal)