Desin Instruments HS-7000 Series, General Instructions Manual

Page: 103 / 108

103
TABLE OF CODES OF LOGIC FUNCTION BLOCK OUTPUTS
USED FOR CONFIGURATION
LOGIC OUTPUTS
Code Mnemonic Block Output
00 COM NOT ASSIGNED (NULL).
01 COM ZERO LOGIC SIGNAL (OFF).
02 COM ONE LOGIC SIGNAL (ON).
03 COM CLOCK (1 SEG).
04 COM PULSE ON START (PINI).
05 DI 1 STATUS (Y).
06 DI 2 STATUS (Y).
07 DI 2 COUNTER EXCEEDS SETPOINT ‘LIM’ (AL).
08 DIR STATUS DIR1 (DIR1).
09 DIR STATUS DIR2 (DIR2).
10 DIR STATUS DIR3 (DIR3).
11 DIR STATUS DIR4 (DIR4).
12 DIR STATUS DIR5 (DIR5).
13 DIR STATUS DIR6 (DIR6).
14 DIR STATUS DIR7 (DIR7).
15 DIR STATUS DIR8 (DIR8).
16 INT TOTAL EXCEEDS SETPOINT (AL).
17 AL 1 STATUS (Y).
18 AL 2 STATUS (Y).
19 AL 3 STATUS (Y).
20 AL 4 STATUS (Y).
21 AL 5 STATUS (Y).
22 AL 6 STATUS (Y).
23 LOG 1 RESULT (Y).
24 LOG 2 RESULT (Y).
25 LOG 3 RESULT (Y).
26 LOG 4 RESULT (Y).
27 LOG 5 RESULT (Y).
28 LOG 6 RESULT (Y).
29 TMR 1 STATUS (Y).
30 TMR 2 STATUS (Y).
31 TMR 3 STATUS (Y).
32 TMR 4 STATUS (Y).
33 SP 1 SETPOINT MODE (MOD).
34 SP 2 SETPOINT MODE (MOD).
35 SP 3 SETPOINT MODE (MOD).