78
Figure 67:
Diagnosis I/O-Port, Program choice (Page 2)
All the inputs are located on the SPS1 (GX2) interface.
Designation
Pin
Description
Program selection 0
4
Program selection 1
5
Program selection 2
6
Program selection 3
7
Program selection 4
24
Program selection 5
25
Program selection 6
26
Choice of screwdriving program 1 - 120
Table 24:
Diagnosis I/O-Port, Program choice (Page 2)
Press the key
, to get to the next diagnosis page or
, to go the previous diagnosis
page.
Figure 68:
Diagnosis I/O-Port, Outputs (Page 3)
All the outputs are located on the SPS1 (GX2) interface. The Reload signal is located on
the I/O interface 3 (GX5).
Designation
Pin
Description
System OK (PU+MC)
11
Main controller and power unit have no faults
Ready
28
the AST40 is ready for screwdriving
Screwdriving cycle active
14
a screwdriver cycle is just active
OK
29
Status of the last sequence was OK
