151
21 EC Declaration of Incorporation
(according to 2006/42/EC dat ed 09 june 2006, appendix II , No. 1 B for incorporation of partly completed machinery)
As
manufacturer
of the partly completed machine we declare that:
the essential requirements of the Directive 2006/42/EC and where applicable the other Directives and Stan-
dards listed below apply to the specified machine.
the relevant technical documentation is compiled in accordance with part B of ANNEX VII
the relevant technical documentation in accordance with part B of ANNEX VII will be transmitted in re-
sponse to a reasonable request by the national authorities in printed form or electronic form (pdf)
Manufacturer
DEPRAG SCHULZ GMBH u. CO.
P.O. Box 1352, Germany-92203 Amberg
Carl-Schulz-Platz 1, Germany-92224 Amberg
Authorized Person
Mr. Josef Bock, address see manufacturer
for Documentation
Designation
Name
SEQUENCE CONTROLLER
Machine Type
_________________________________________________________
Serial Number
_________________________________________________________
Year of Manufacture
_________________________________________________________
Directives
Date
Applied and fulfilled essential requirements
Machine directive 2006/42/EC
2006-06
ANNEX I, Article 1.1.2 a) and b), 1.1.3, 1.1.5, 1.3.2, 1.3.4
and 1.5.1 Assembly instructions in accordance with Annex
VII B a
Low voltage directive 2006/95/EC
2006-12
ANNEX I basic requirements
Directive for electromagnetic com-
patibility 2004/108/EC
2004-12
ANNEX I basic requirements
Standards
Date
Remark
EN ISO 12100
Machine safety
2011-03
fundamental rules, general fabrication directives
EN 60204-1
2007-06
Machine safety; electric equipment of machines, gener al
requirements
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the Directive 2006/42/EC, where appro-
priate.
05/07/2013
