63
Alternative 2:
Figure 37:
Process display, Alternative 2
The number and the name of the active program as well as the number of the step of the
last screwdriving step are displayed in the top row.
In the second line the date, time and duration of the last screw assembly is displayed.
The status of the last screw assembly is displayed in the Status area. The status field will
be green if the screw assembly was fault-free. The status field will be red if the screw
assembly was ended with faults. In this case a help text is shown that indicates the fault
description. To display this text, press on the entry field with the error message or on the
key
.
The torque and angle results of the last screw assemblies are displayed in the areas
Measuring System 1, Motor and Measuring System 2, depending on the availability of the
measuring system.
Example: This screwdriver has one available measuring system and the final values after
the screwdriving to torque are displayed. In this case, the maximum torque and the angle
of rotation of the screwed joint will be displayed in the area Measuring System 1. The
torque that was ascertained at the time of the maximum torque at Measuring System 1 by
means of the motor as well as the maximum ascertained angle of rotation is displayed in
the area Motor (see
Figure 37: Process display, Alternative 2
).
9.2.4.2 Statistics
Figure 38:
Statistics
