manualshive.com logo in svg

Denso GT20Q-SB, User Manual

Share
Download
Denso GT20Q-SB User Manual Download Page 40

 

27 

7.2.1.3 AI (Application Identifier) Extraction 

When the scanned code is a GS1-128, GS1 DataBar, or GS1 Composite (excludes linear components of UPC/EAN 
Composite) code, the scanner edits the data using AI (Application Identifier) and outputs scanned data in the data 
transmission format (refer to 

Section 9.4

) selected in the scanner in accordance with the specified parameters. 

Two types of AI extraction are available: AI delimited mode and AI parenthesis mode. For the AI used in data editing, refer to 
(3) AI Table that follows below. 

(1) AI Delimited Mode 

The scanner extracts the data using the specified AI (maximum of three types) and replaces the AI with specified delimiters 
(selected from three types: header/terminator, comma, tab) for output. 

Parameters 

Parameters 

Value 

Transmit data regardless of the results 

Enabled/Disabled 

When “Transmit data regardless of the results” is enabled, the scanned data will be output without editing if AI extraction 
fails. 

Delimiters 

Header/Terminator

 

 

The scanner adds headers and terminators to each split string and outputs the data. 

 

The scanner ID, code mark, number of digits, prefix and suffix are added to each split data if enabled for output. 

 

The total number of digits output will be the number of digits post edit. 

Example: Scanned data: “(01)94901234567894(11)030808(13)030810” Header: STX, Terminator: ETX, Scanner ID: 

Prohibited, Code mark: Disabled, The number of digits: Disabled, Prefix/Suffix transmission: Not specified, BCC 
transmission: Disabled 

Specified AI 

Output Data 

01,11,13 

[STX]001494901234567894[ETX][STX]0006030808[ETX][STX]0006030810[ETX] 

 Comma

 

 

The scanner outputs split strings delimited by commas. No comma is added to the last item of split data. 

 

A header and terminator are added to each item of split data. The scanner ID, code mark, number of digits, prefix and 
suffix are not output, regardless of whether output is enabled or disabled. 

Example: Scanned data: “(01)94901234567894(11)030808(13)030810” Header: STX, Terminator: ETX, Scanner ID: 

Prohibited, Code mark: Disabled, The number of digits: Disabled, Prefix/Suffix transmission: Not specified, BCC 
transmission: Disabled 

Specified AI 

Output Data 

01,11,13 

[STX]94901234567894,030808,030810[ETX] 

Tab (ASCII code 09H<HT>)

 

 

The scanner outputs split strings delimited by tabs. No tab is added to the last item of split data. 

 

A header and terminator are added to each item of split data. The scanner ID, code mark, number of digits, prefix and 
suffix are not output, regardless of whether output is enabled or disabled. 

Example: Scanned data: “(01)94901234567894(11)030808(13)030810” Header: STX, Terminator: ETX, Scanner ID: 

Prohibited, Code mark: Disabled, The number of digits: Disabled, Prefix/Suffix transmission: Not specified, BCC 
transmission: Disabled 

Specified AI 

Output Data 

01,11,13 

[STX]94901234567894[TAB]030808[TAB]030810[ETX] 

Summary of Contents for GT20Q-SB













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands