8
Chapter 3
Scanning Method
3.1 Before Use
When using the scanner for the first time or when the scanner has not been used for a long period of time, always charge the
battery before use. (See
for charging methods.)
3.2 Operating Procedure
(1)
Place the scanning window over the code, and pull the trigger switch. The markers indicating the scanning range and the
illumination light for scanning the code illuminate, and the code can be scanned.
(If the trigger switch mode is in momentary switching mode (reverse type), release the trigger switch. This operation is
not necessary if the trigger switch mode is set to continuous reading modes 1 or 2, or auto sensing mode.)
(2)
Once the code has been scanned correctly, the indicator LED will illuminate in blue, the beeper will sound and the unit
will vibrate.
Note
: The scannable range indicated by the markers is only a reference, and does not guarantee that codes within this
range will be scanned.
Note
: The scannable range is smaller than the area indicated by the markers.
When the scanning distance is 7.5 cm, the scannable range is approximately 6
×
4 cm.
Note
: Unless multi-line barcode scanning is enabled, or the split QR Code scanning mode is set to “batch edit mode,”
do not attempt to place more than one code within the scannable range. If two codes are in the scannable range
simultaneously, the codes may not be scanned, or the scanner may scan them in alternately over and over again.
Note
: The duration of double scan prevention can be set using the configuration software (ScannerSetting_2D).
Note
: Codes can be scanned from any direction, but please scan the code from a position where everything including
the margins fit comfortably within the scanning field.
Note
: Depending on the scanner illumination light, the room lighting, and the label angle, the light reflected off the
label may become exceedingly strong in places, creating a specular effect that prevents code scanning. To resolve
this issue, change the angles and/or distance of the label and scanner.
Indicator LED
Trigger switch
Scannable
distance
Marker
Scannable range
