HD31
- 49 -
V1.6
5.2
SAMPLE ACQUISITION
1.
Press
SELECT
to display the
REC
command in the command bar,
then select the command by press-
ing
F1
.
2.
Select the
AUTO
command by pressing
F1
to start automatic
once-per-second sample acquisition.
Select the
MANL
command by pressing
F2
to manually ac-
quire a sample.
3.
The number of acquired samples appears in the upper part of
the measurement line.
AUTO and MANL commands start the acquisition of all the quantities selected for the RECORD
function. If quantities have not been explicitly selected, the acquisition of all the quantities is
started (except for the INTEGRAL-type ones).
Note
: in case only some quantities were explicitly selected for the RECORD function, AUTO and
MANL commands are available only if one of the quantities chosen for the function is selected
on the display (indicated by a checkmark).
Select again the
AUTO
command (
F1
key) to stop the automatic acquisition of the samples.
Press
ESC
to exit the REC menu.
Number of acquisitions
Summary of Contents for HD31
Page 6: ...HD31 6 V1 6 2 DESCRIPTION Fig 2 1 instrument description...
Page 149: ...HD31 149 V1 6 NOTES...
Page 150: ...HD31 150 V1 6 NOTES...
Page 151: ......
