HD31
- 106 -
V1.6
3.
To define a new unit, select “. . . . . . . . ” item using
S
and
T
,
then press the
F1
key (command
SET
) to confirm.
4.
Enter the first character using
S
and
T
, then select the "-->"
command (
F2
key) to move to the next characters (the cur-
rently selected character flashes). To move to a previous cha-
racter, select the "<--" command (
F1
key). After setting all
the characters, press
OK
(
F3
key) to confirm.
Note
: enter the new measurement unit by aligning it on the
right, leaving any empty spaces on the left. The maximum
length is 8 characters.
5.
The new measurement unit now appears in the list of avail-
able units. Press
F3
(
OK
command) to select.
Note
: Press
F2
(
RESET
command) to cancel a user-defined
measurement unit from the list of available units.
13.6.3
D
ISPLAYING THE ASSOCIATED QUANTITY
After defining a physical quantity associated to the voltage or current values acquired by a
module, it can be displayed in a measurement line of the display:
1.
In measurement mode, select the measurement line corresponding to the VP473 or IP472
module using
S
and
T
.
2.
Press
SELECT
to display the
UNIT
in the command bar, then select
the command by pressing the
F2
key.
Note
: if the RECORD and/or LOG
functions are enabled, the com-
mand is disabled.
Summary of Contents for HD31
Page 6: ...HD31 6 V1 6 2 DESCRIPTION Fig 2 1 instrument description...
Page 149: ...HD31 149 V1 6 NOTES...
Page 150: ...HD31 150 V1 6 NOTES...
Page 151: ......
