HD31
- 15 -
V1.6
2.
Select the
SETUP
item using
S
and
T
, then press
F3
(
OK
command) to confirm.
3.
Select the
CHANNELS
item using
S
and
T
, then press
F3
(
OK
command) to confirm.
4.
Select the A, B or C input of the instrument, using
S
and
T
,
then press
F3
(
OK
command) to confirm.
5.
The list of the available measured and calculated quantities,
relevant to the selected input is displayed. The checkmark
next to a quantity indicates that the quantity measurement is
enabled (appears in the display). Using
S
and
T
, select the
quantity to be enabled or disabled, then press
F1
(
SEL
com-
mand) to toggle between the enabled and disabled states of
the quantity.
6.
Press
F3
(
OK
command) to confirm.
Note: the enabled state of several quantities can be changed by selecting them one at a
time, before confirming; the changed quantities are displayed in yellow to highlight
changes.
The instrument allows the setting of the quantity enable state to be saved, so as to be able to re-
store it afterwards and cancel any changes carried out thereafter.
Summary of Contents for HD31
Page 6: ...HD31 6 V1 6 2 DESCRIPTION Fig 2 1 instrument description...
Page 149: ...HD31 149 V1 6 NOTES...
Page 150: ...HD31 150 V1 6 NOTES...
Page 151: ......
