DeltaOHM HD31, Operating Manual

Page: 115 / 154

HD31
- 115 -
V1.6
INTEGRAL Function:
Command Response Description
ITGCHN:cc
(cc = 01…36) ITGCHN:cc;n| Indicates whether the measurement with
sequential number cc on the display of the
instrument is selected for the calculation
of the integral:
ƒ
not selected if n=0
ƒ
selected if n=1
ITGCHN:cc;n
(cc = 01…36; n=0,1) ITGCHN:cc;n; ok| Selects/deselects the measurement with
sequential number cc on the display of the
instrument for the calculation of the inte-
gral:
ƒ
deselects if n=0
ƒ
selects if n=1
ITGSTATUS:cc
(cc = 01…36) ITGSTATUS:cc;n| Indicates the integral calculation status
for the measurement with sequential
number cc on the display of the instru-
ment:
ƒ
function disabled if n=0
ƒ
function enabled if n=1
ITGSTATUS:cc;n
(cc = 01…36; n=0,1) ITGSTATUS:cc;n; ok| Enables/disables the calculation of the in-
tegral for the measurement with sequential
number cc on the display of the instru-
ment:
ƒ
disables if n=0
ƒ
enables if n=1
ITGCLEAR:cc
(cc = 01…36) ITGCLEAR:cc; ok| Resets the calculation of the integral.