HD31
- 83 -
V1.6
4.
Select the Baud Rate using
S
and
T
, then press the
F3
key
(
OK
command) to confirm.
Note
: the current setting appears in white color, while the
other available settings are yellow to highlight that they are
not the current setting.
5.
The instrument returns to the SERIAL RATE item, Press
ESC
twice to exit the menu.
10.2
S
ENDING MEASUREMENTS FOR PRINTING
1.
Press
SELECT
to display the
command in the command bar.
2.
Select the
command by pressing the
F1
key, the in-
formation regarding the connected probes (type of probe, se-
rial number and type of calibration) and the three measure-
ments currently displayed are sent to the printer or to the PC.
10.3
R
ECEIVING MEASUREMENTS INTO
PC
You need to activate a serial communication program in your PC, such as Hyperterminal, if you
want to receive the measurements sent by the instrument with the PRINT function into your PC.
The RS232C serial output of the instrument must be connected to a RS232C serial port of your PC
or, if your PC doesn’t have serial ports, to a USB port through a RS232C/USB converter (e.g.
C205M
adapter cable). If a RS232C/USB converter is used, install into your PC the related USB
drivers.
The number of the COM port the instrument is connected to must be set in the communication
program and the communication parameters indicated at the beginning of the chapter must be
configured (8N1, Xon/Xoff, Baud Rate equal to the one set in the instrument).
If the serial communication program has the autosave function of the received characters (e.g.
the "Transfer >> Capture Text " command in Hyperterminal), the function for saving the re-
ceived measurements into a file of your PC can be enabled.
Summary of Contents for HD31
Page 6: ...HD31 6 V1 6 2 DESCRIPTION Fig 2 1 instrument description...
Page 149: ...HD31 149 V1 6 NOTES...
Page 150: ...HD31 150 V1 6 NOTES...
Page 151: ......
