Delta DVS-328 series, User Manual

Page: 210 / 246

D V S S e r i e s M a n a g e d E t h e r n e t S w i t c h U s e r M a n u a l
C - 1 0
Delta IES Object (0x64)
Class Attributes
Attr ID Access rule Name Data type Description of attribute
1 Get Revision UINT Revision of this object
Instance Attributes
Attr ID Access rule Name Data type Description of attribute
1 Get/Set Reboot Device USINT
Reboot device
Set 0x0001 to reboot device, and
return to 0x0000 if reboot is
completed.
2 Get/Set Reset Device USINT
Reset to default
Set 0x0001 to reset configuration, and
return to 0x0000 if reset is completed.
3 Get
Firmware Release
Date
UDINT
Ex: 20120918, PM9:00
Word 0=0x1215, Word 1=0x0C09
4 Get
Relay Output
Status
WORD
Relay Output Status
Bit 0-1: Relay Output 1 status
Bit 2-3: Relay Output 2 status
Other Reserved (should be 0)
00=Digital output not support/pressed
01=Switch Contact is OPEN (OFF)
10=Switch Contact is CLOSED (ON)
11=Reserved
11 Get Alarm Status ULINT
Alarm Status
(0 is ON, 1 is OFF)
Bit 0: switch code start
Bit 1: switch warm start
Bit 2: power1 state on->off
Bit 3: power1 state off->on
Bit 4: power2 state on->off
Bit 5: power2 state off->on
Bit 6: DI1 state on->off
Bit 7: DI1 state off->on
Bit 8: DI2 state on->off
Bit 9: DI2 state off->on
Bit 10: authentication failure
Bit 11: dot1d Bridge New Root
Bit 12: dot1d Bridge Topology
Changed
Bit 13: LLDP Remote Tables Changed
Bit 14: configuration changed
Bit 15: firmware update
Bit 16: IP changed
Bit 17: password changed
12 Get
Bandwidth
overload
ULINT
Bit 0: Port 0 state
Bit 1: Port 1 state….
Bit 63: Port 63 state
0=OFF or not support
1=Bandwidth overload
13 Get
Loopback
detection port
status
ULINT
Bit 0: Port 0 state
Bit 1: Port 1 state….
Bit 63: Port 63 state
0=OFF or not support
1=Loopback detected
15 Get
Redundancy
Protocol
USINT
0x0000: None
x0001: RSTP/STP