C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 8 1
3.8.1.2
Rate Limiting
You can configure the traffic rate for each interface in both directions on this page.
Rate Limiting
Description
Factory default
Port
The interface number
interface number
Egress RateLimit (kbps)
Enter the egress port rate limit as a value in the range of 1 to 1,000,000 kbits per
second (kbits/s). The value that you enter is actually applied in increments of 64
kbits/s. If the value is 0, it effectively disables the rate limit.
0
Ingress RateLimit (kbps)
Enter the ingress port rate limit as a value in the range of 1 to 1,000,000 kbits per
second (kbits/s). The value that you enter is actually applied in increments of 64
kbits/s. If the value is 0, it effectively disables the rate limit.
0
Summary of Contents for DVS-328 series
