manualshive.com logo in svg

Delta DVS-328 series, User Manual

The Delta DVS-328 series offers exceptional performance with its cutting-edge features. Easily navigate through its intuitive interface using the detailed User Manual provided with the product. Customers can conveniently download the free manual from our website, ensuring a seamless and hassle-free experience. manualshive.com

Share
Download
background image

D V S   M a n a g e d   I n d u s t r i a l   R a c k   Mo u n t   E t h e r n e t   S wi t c h   U s e r   Ma n u a l  

3 - 11 2  

RMON Ethernet History Statistics 

Item 

Description 

Index 

The index that uniquely identifies the entry in the History Control Configuration 
table. 

Sample Index 

An index that uniquely identifies the particular polling sample that this entry 
represents among all polling samples associated with the same entry in the 
History Control Configuration table. This index starts at 1 and increases by one 
as each new polling sample is taken. 

Interval Start 

The time when the polling (sampling) interval started. 

Drop Events 

The number of events during the sampling interval in which packets were 
dropped on the interface because of the lack of resources. This number does not 
specify the number of packets that were dropped but the number of times the 
packets were dropped. 

Octets 

The number of data octets (including those in bad packets) received on the 
interface (excluding the framing bits, but including the FCS octets) during the 
sampling interval. 

Packets 

The number of packets received on the interface (including the bad packets, the 
broadcast packets, and the multicast packets) during the sampling interval. 

Broadcast Packets 

The number of broadcast packets received on the interface during the sampling 
interval. These packets were directed to the broadcast addresses. 

Multicast Packets 

The number of multicast packets received on the interface during the sampling 
interval. These packets were directed to the multicast addresses. (This number 
does not include the packets addressed to a broadcast addresses.) 

CRC Errors 

The number of packets which are received on the interface during the sampling 
interval, have a length (excluding the framing bits, but including the FCS octets) 
between 64 and 1518 octets, and have either a bad frame check sequence 
(FCS) with an integral number of octets (FCS error) or a bad FCS with a non 
integral number of octets (alignment error). 

Under Size Packets 

The number of packets which are received on the interface during the sampling 
interval, less than 64 octets in length (excluding the framing bits, but including 
the FCS octets), and were well formed. 

Over Size Packets 

The number of packets which are received on the interface during the sampling 
interval, more than 1518 octets in length (excluding the framing bits, but 
including the FCS octets) and that were well formed. 

Fragments 

The number of packets which are received on the interface during the sampling 
interval, are less than 64 octets in length (excluding the framing bits, but 
including the FCS octets), and have either a bad frame check sequence (FCS) 
with an integral number of octets (FCS error) or a bad FCS with a non integral 
number of octets (alignment error). 

Jabbers 

The number of packets which are received on the interface during the sampling 
interval, are longer than 1518 octets in length (excluding the framing bits, but 
including the FCS octets) , and have either a bad frame check sequence (FCS) 
with an integral number of octets (FCS error) or a bad FCS with a non integral 
number of octets (alignment error). 

Collisions 

The best estimate of the number of collisions on the interface during the 
sampling interval. 

Utilization 

The best estimate of the mean physical layer network utilization on the interface 
during the sampling interval, in hundredths of a percent. 

 
 
 
 
 

Summary of Contents for DVS-328 series























































































































































































































































Reviews:

No comments

Related manuals for DVS-328 series

Eaton Power Xpert Meter 2000 Instructions Manual preview
Power Xpert Meter 2000
Brand: Eaton Pages: 16
Eaton POW-R-COMMAND 1000 User Manual preview
POW-R-COMMAND 1000
Brand: Eaton Pages: 84
Icidu NI-707533 Manual Manual preview
NI-707533
Brand: Icidu Pages: 10
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Brand: Javad Pages: 35
Planet GSW-1602SF User Manual preview
GSW-1602SF
Brand: Planet Pages: 20
Kontron 50099 067 User Manual preview
50099 067
Brand: Kontron Pages: 42
eWON 2101CD Installation Manual preview
2101CD
Brand: eWON Pages: 34
Magma ExpressBox2 EB2 User Manual preview
ExpressBox2 EB2
Brand: Magma Pages: 74
ADDON ARM8100 Quick Installation Manual preview
ARM8100
Brand: ADDON Pages: 4
EINHELL TC-RO 850 Original Operating Instructions preview
TC-RO 850
Brand: EINHELL Pages: 32
LevelOne FUS-3100 Quick Installation Manual preview
FUS-3100
Brand: LevelOne Pages: 61
Draytek Vigor 3200 Series User Manual preview
Vigor 3200 Series
Brand: Draytek Pages: 356
Crestron STIRP Installation Instructions preview
STIRP
Brand: Crestron Pages: 2
AEG BOF18B2 Original Instructions Manual preview
BOF18B2
Brand: AEG Pages: 24
MikroTik RouterBOARD 711-5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD 711-5HnD
Brand: MikroTik Pages: 2
Aim ANET1553 Series User Manual preview
ANET1553 Series
Brand: Aim Pages: 72
4gon RouterBOARD 493 Quick Setup Manual And Warranty Information preview
RouterBOARD 493
Brand: 4gon Pages: 2
AVYCON AVR-HN516P16A Quick Start Manual preview
AVR-HN516P16A
Brand: AVYCON Pages: 2

Brands by name

Popular brands

Load more brands