Delta DVS-328 series, User Manual

Page: 233 / 246

A p p e n d i x C E t h e r N e t / I P
C - 3 3
Attr ID Access rule Name Data type Description of attribute
3 Get
Firmware Release
Date
UDINT
Ex: 20120918, PM9:00
Word 0=0x1215, Word 1=0x0C09
4 Get
Relay Output
Status
WORD
Relay Output Status
Bit 0-1: Relay Output 1 status
Bit 2-3: Relay Output 2 status
Other Reserved (should be 0)
00=Digital output not support/pressed
01=Switch Contact is OPEN (OFF)
10=Switch Contact is CLOSED (ON)
11=Reserved
11 Get Alarm Status ULINT
Alarm Status
(0 is ON, 1 is OFF)
Bit 0: switch code start
Bit 1: switch warm start
Bit 2: power1 state on->off
Bit 3: power1 state off->on
Bit 4: power2 state on->off
Bit 5: power2 state off->on
Bit 6: DI1 state on->off
Bit 7: DI1 state off->on
Bit 8: DI2 state on->off
Bit 9: DI2 state off->on
Bit 10: authentication failure
Bit 11: dot1d Bridge New Root
Bit 12: dot1d Bridge Topology
Changed
Bit 13: LLDP Remote Tables Changed
Bit 14: configuration changed
Bit 15: firmware update
Bit 16: IP changed
Bit 17: password changed
12 Get
Bandwidth
overload
ULINT
Bit 0: Port 0 state
Bit 1: Port 1 state….
Bit 63: Port 63 state
0=OFF or not support
1=Bandwidth overload
13 Get
Loopback
detection port
status
ULINT
Bit 0: Port 0 state
Bit 1: Port 1 state….
Bit 63: Port 63 state
0=OFF or not support
1=Loopback detected
15 Get
Redundancy
Protocol
USINT
0x0000: None
x0001: RSTP/STP
16 Get RSTP Root USINT
0x0000: Not Root
0x0001: Root
17 Get
Redundancy -
RING Mode
USINT
0x00: None ( Disable )
0x01: Master
0x02: Slave
18 Get
Redundancy -
Ring State
USINT
RING function is disable:
0x00: None
RING Mode is Master:
0x00: Discover
0x01: Monitor
0x02: Fault
RING Mode is Slave: