Delta DVS-328 series, User Manual

Page: 223 / 246

A p p e n d i x C E t h e r N e t / I P
C - 2 3
OPEN ( OFF )
10 = Switch Contact is
CLOSED ( ON )
11 = Reserved
11 Get AlarmStauts ULINT
Alarm Status
( 0 is ON, 1 is OFF )
Bit 0: switch code start
Bit 1: switch warm start
Bit 2: power1 state on->off
Bit 3: power1 state off->on
Bit 4: power2 state on->off
Bit 5: power2 state off->on
Bit 6: DI1 state on->off
Bit 7: DI1 state off->on
Bit 8: DI2 state on->off
Bit 9: DI2 state off->on
Bit 10: authentication
failure
Bit 11: dot1d Bridge New
Root
Bit 12: dot1d Bridge
Topology Changed
Bit 13: LLDP Remote
Tables Changed
Bit 14: configuration
changed
Bit 15: firmware update
Bit 16: IP changed
Bit 17: password changed
12 Get Bandwidth overload ULINT
Bit 0: Port 0 state
Bit 1: Port 1 state….
Bit 63: Port 63 state
0 = OFF or not support
1 = Bandwidth overload
13 Get
Loopback detection
port status
ULINT
Bit 0: Port 0 state
Bit 1: Port 1 state….
Bit 63: Port 63 state
0 = OFF or not support
1 = Loopback detected
15 Get Redundancy Protocol USINT
0x0000: None
0x0001: RSTP/STP
16 Get RSTP Root USINT
0x0000: Not Root
0x0001: Root
17 Get
Redundancy - RING
Mode
USINT
0x00: None ( Disable )
0x01: Master
0x02: Slave
18 Get
Redundancy - Ring
State
USINT
19 Get
Redundancy - CHAIN
State
USINT
0x00: None
0x01: The chain failure is
happened.