Delta DVS-328 series, User Manual

Page: 109 / 246

D V S M a n a g e d I n d u s t r i a l R a c k Mo u n t E t h e r n e t S wi t c h U s e r Ma n u a l
3 - 8 8
3.10.2 Binding Table
The MAC binding information is displayed on this page.
MAC Binding Table
Setting Description
Interface The interface to which the MAC ACL is bound
Direction
The packet filtering direction for the MAC ACL. The only valid direction is
Inbound, which means the MAC ACL rules are applied to traffic entering the
interface.
ACL Type
The type of ACL to which the interface is bound. This is a fixed field that always
shows MAC ACL.
ACL ID The name of the ACL to which the interface is bound
Seq No
The sequence number that signifies the order of the ACL to which the interface is
bound.
3.11 Security Settings
The Delta DVS series switch provides many ways to verify the packets, authenticate users or block the attack
traffic. You can choose and configure these security settings according to your network environment.
3.11.1 Security
This group allows you to configure a MAC address, an IP address or the Port authentication to reach the
security purpose.
3.11.1.1 Port Security
The port security lets you lock the interface. If the port security of the interface is enabled, then it can only
forward the traffic from the MAC addresses that you specified.
The Port Security feature allows you to stop the MAC address learning for a specific port. After you stop the
MAC learning (enable Port Security), only the source MAC address of the packet listed in the Static MAC
address table with the binding port can access the switch through the port, and other packets will be discarded.
IMPORTANT :
Make sure that you save the configuration in the Save Configuration
page after you have applied the configuration changes. (Save
Config

Save Configuration) If you do not save the configuration,
then the configuration will be cleared after the switch is rebooted.