Delta DVS-328 series, User Manual

Page: 108 / 246

C h a p t e r 3 F e a t u r e d F u n c t i o n s
3 - 8 7
3.10.1.2 MAC Binding Configuration
When you bind a MAC ACL to an interface, all rules that you have defined for the MAC ACL are applied to the
interface.
MAC Binding Configuration
Setting Description
ACL ID Select an ACL ID to bind MAC.
Direction
The Direction drop-down list is fixed at Inbound. Only incoming packets can be
filtered.
Sequence Number Enter a number in the range of 1 to 4,294,967,295.
Port
Select one interface or more interfaces by clicking the square or click for the
second time to clear the interface.
LAG
Select one LAG or more LAGs by clicking the square or click for the second time
to clear the interface.
Interface Binding Status
Setting Description
Interface The interface to which the MAC ACL is bound
Direction
The packet filtering direction for the MAC ACL. The only valid direction is
Inbound, which means the MAC ACL rules are applied to traffic entering the
interface.
ACL Type
The type of ACL to which the interface is bound. This is a fixed field that always
shows MAC ACL.
ACL ID The name of the ACL to which the interface is bound
Seq No
The sequence number that signifies the order of the ACL to which the interface is
bound. The number should be configured from 1 to 4,294,967,295.
The sequence number specifies the order of the ACL relative to the existing
ACLs that are bound to the same interface or interfaces. A lower number
specifies a higher precedence order. If a sequence number is already in use for
the interface or interfaces, the ACL replaces the existing ACL that uses the same
sequence number.