Delta DPM-C530, Operation Manual

Page: 29 / 126

C h a p t e r 4 O p e r a t i o n
4 - 7
4_
19. Select Time Delay and then press ENTER to set the alarm delay time (cancel).
20. After you select the option, use UP and DOWN to select the value.
21. Press ENTER to save the setting and move on to the next digit.
22. Repeat steps 20–21 until you complete the settings. Press ENTER to save the setting or press
MENU to cancel without saving the changes.
23. Repeat the above steps to set up all the 29 alarm types.
24. Press MENU to go back to the setting menu.
Pi ck up
Set point
Dropo ut
Se tpoi nt
P ic kup
Ti m e Del ay
A l arm Peri od
Dropout
Tim e Del ay
4.2.7 Set up the Demands

Method: Supports time block calculations.

Interval: Time intervals for demands; 1–60 minutes, 1 is default.

Set up Steps
1. Press MENU to display the setting menu.
2. Select 0 and press ENTER to enter the Setup menu.
3. Select 7 and press ENTER to enter the Demand menu.
4. Select the item to set up and then press ENTER.
5. After you select the option, use UP and DOWN to select the value.
6. Press ENTER to save the setting and move on to the next digit.
7. Repeat steps 5–6 until you complete the settings. Press ENTER to save the setting or press MENU
to cancel without saving the changes.
8. Press MENU to go back to the setting menu.