Dell XPS 8300 Service Manual Download Page 93

Page: 93 / 116

Power Supply

Power Supply

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

WARNING:

To guard against electrical shock, always unplug your computer from

the electrical outlet before removing the cover.

WARNING:

Do not operate your computer with any cover(s) (including computer

covers, bezels, filler brackets, front-panel inserts, etc.) removed.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

Removing the Power Supply

Follow the instructions in "Before You Begin" on page 13.

Remove the computer cover (see "Removing the Computer Cover" on

page 17).

Disconnect the DC power cables from the system board and the drives

(see "System Board Components" on page 10).

Remove the four screws that secure the power supply to the chassis.

Press the power supply clamps to release the power supply from the

chassis.

Slide and lift the power supply away from the chassis.

book.book Page 93 Wednesday, April 25, 2012 12:34 PM

Summary of Contents for XPS 8300





















































































































Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands

Dell XPS 8300, Service Manual

Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands