Dell XPS 8300 Service Manual Download Page 35

Page: 35 / 116

Wireless Mini-Card

Follow the instructions in "Before You Begin" on page 13.

Align the notch on the Mini-Card with the tab in the system-board

connector.

Insert the Mini-Card at a 45-degree angle into the system-board

connector.

Press the other end of the Mini-Card down until it clicks into place. If you

do not hear the click, remove the Mini-Card and reinstall it.

Connect the appropriate antenna cables to the WLAN card you are

installing. The WLAN card has two triangles marked on the label (black

and white):
• Connect the black cable to the connector marked with a black

triangle.

• Connect the white cable to the connector marked with a white

triangle.

Replace the computer cover (see "Replacing the Computer Cover" on

page 18).

Reconnect the computer and devices to electrical outlets, and then turn

them on.

book.book Page 35 Wednesday, April 25, 2012 12:34 PM

Summary of Contents for XPS 8300





















































































































Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands

Dell XPS 8300, Service Manual

Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands