Dell XPS 8300 Service Manual Download Page 75

Page: 75 / 116

Power Button Module

Replacing the Power Button Module

Follow the instructions in "Before You Begin" on page 13.

Align and push the power button module tabs into the slots on the top

panel.

Connect the power button module cable to the system board connector,

F_PANEL (see "System Board Components" on page 10).

Replace the top cover (see "Replacing the Top Cover" on page 59).

Replace the optical drive (see "Replacing the Optical Drive" on page 51).

Replace the front bezel (see "Replacing the Front Bezel" on page 29).

Replace the computer cover (see "Replacing the Computer Cover" on

page 18).

Connect your computer and devices to electrical outlets and turn them on.

book.book Page 75 Wednesday, April 25, 2012 12:34 PM

Summary of Contents for XPS 8300





















































































































Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands

Dell XPS 8300, Service Manual

Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands