Dell XPS 8300 Service Manual Download Page 56

Page: 56 / 116

Drives

Replacing the Media Card Reader

Follow the instructions in "Before You Begin" on page 13.

Gently slide the Media Card Reader guides into the slots in the top panel.

Replace the two screws that secure the Media Card Reader to the front

panel.

Connect the Media Card Reader cable to the system board connector

F_USB1 (see "System Board Components" on page 10).

Replace the top cover (see "Replacing the Top Cover" on page 59).

Replace the optical drive (see "Replacing the Optical Drive" on page 51).

Replace the front bezel (see "Replacing the Front Bezel" on page 29).

Replace the computer cover (see "Replacing the Computer Cover" on

page 18).

Connect your computer and devices to electrical outlets, and then turn

them on.

book.book Page 56 Wednesday, April 25, 2012 12:34 PM

Summary of Contents for XPS 8300





















































































































Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands

Dell XPS 8300, Service Manual

Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands