Dell XPS 8300 Service Manual Download Page 34

Page: 34 / 116

Wireless Mini-Card

Remove the computer cover (see "Removing the Computer Cover" on

page 17).

Disconnect the antenna cable(s) from the Mini-Card.

Release the Mini-Card by pressing the clips on either side of the card.

Lift the Mini-Card away from the system-board connector.

CAUTION:

When the Mini-Card is not in the computer, store it in protective

antistatic packaging (see "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer).

Replacing the Mini-Card

CAUTION:

The connectors are keyed to ensure correct insertion. Use of

excessive force may damage the connectors.

CAUTION:

To avoid damage to the Mini-Card, ensure that there are no cables or

antenna cables under the Mini-Card.

antenna cables (2)

Mini-Card

clips (2)

book.book Page 34 Wednesday, April 25, 2012 12:34 PM

Summary of Contents for XPS 8300





















































































































Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands

Dell XPS 8300, Service Manual

Search results

Summary of Contents for XPS 8300

Reviews:

Related manuals for XPS 8300

Brands by name

Popular brands