manualshive.com logo in svg

Dell XPS 8300, Service Manual, Page: 49 / 116

Share
Download
Dell XPS 8300 Service Manual Download Page 49

Drives

49

2

Check the documentation that shipped with the hard drive to verify that it 

is configured for your computer.

3

Slide the secondary hard drive into the hard drive cage.

4

Align the screw holes on the secondary hard drive with the screw holes on 

the hard drive cage.

5

Replace the four screws that secure the secondary hard drive to the hard 

drive cage.

Replacing the Hard Drive Cage

1

Follow the instructions in "Before You Begin" on page 13.

2

Align the screw holes on the hard drive cage with the screw holes on the 

chassis.

3

Replace the three screws that secure the hard drive cage to the chassis.

4

If applicable, connect the power and data cables to the secondary hard 

drive (see "System Board Components" on page 10).

Replacing the Primary Hard Drive

1

Follow the instructions in "Before You Begin" on page 13.

2

Check the documentation that shipped with the drive to verify that it is 

configured for your computer.

3

Slide the primary hard drive into the hard drive cage.

4

Align the screw holes on the primary hard drive with the screw holes on the 

chassis.

5

Replace the four screws that secure the primary hard drive to the chassis.

6

Connect the power and data cables to the primary hard drive (see "System 

Board Components" on page 10).

7

Replace the computer cover (see "Replacing the Computer Cover" on 

page 18).

8

Connect your computer and devices to electrical outlets, and then turn 

them on.

9

See the documentation that shipped with the hard drive for instructions 

on installing any software required for drive operation.

book.book  Page 49  Wednesday, April 25, 2012  12:34 PM

Summary of Contents for XPS 8300





















































































































Reviews:

No comments