Dell XPS 630 Owner'S Manual Download Page 97

Page: 97 / 168

Troubleshooting Tools

Starting the Dell Diagnostics From the Drivers and Utilities Media

Insert the

Drivers and Utilities

media

Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.

NOTE:

If you wait too long and the operating system logo appears, continue

to wait until you see the Microsoft

Windows

desktop; then, shut down your

computer and try again.

NOTE:

The next steps change the boot sequence for one time only. On the

next start-up, the computer boots according to the devices specified in the
system setup program.

When the boot device list appears, highlight

CD/DVD/CD-RW

and press

<Enter>.

Select the

Boot from CD-ROM

option from the menu that appears and

press <Enter>.

Type

to start the CD menu and press <Enter> to proceed.

Select

Run the 32 Bit Dell Diagnostics

from the numbered list. If multiple

versions are listed, select the version appropriate for your computer.

When the Dell Diagnostics

Main Menu

appears, select the test you want

to run.

book.book Page 97 Friday, April 25, 2008 3:58 PM

Summary of Contents for XPS 630









































































































































































Search results

Summary of Contents for XPS 630

Reviews:

Related manuals for XPS 630

Brands by name

Popular brands

Dell XPS 630, Owner'S Manual

Search results

Summary of Contents for XPS 630

Reviews:

Related manuals for XPS 630

Brands by name

Popular brands