manualshive.com logo in svg

Dell XPS 630, Owner'S Manual, Page: 35 / 168

Share
Download
Dell XPS 630 Owner'S Manual Download Page 35

Setting Up Your Computer

35

3

Turn on the printer and then turn on the computer. 

4

Depending on your computer’s operating system, a printer wizard may be 
available to help you install the printer driver:

If your computer is running the Microsoft

®

 Windows

®

 XP operating system 

and the 

Add New Hardware Wizard

 window appears, click 

Cancel

.

If your computer is running the Windows Vista

®

 operating system

, click the 

Windows Vista Start button 

, and click 

Network

→ 

Add a printer 

to 

start the Add Printer Wizard.

5

Install the printer driver if necessary. See "Reinstalling Drivers and 
Utilities" on page 118 and the documentation that came with your printer.

Connecting Two Monitors

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

If you purchased a graphics card that supports dual monitors, follow these 
instructions to connect and enable your monitors. The instructions tell you 
how to connect either two monitors (each with a VGA connector), one monitor 
with a VGA connector and one monitor with a DVI connector, or a TV.

 

NOTICE: 

If you are connecting two monitors that have VGA connectors, you must 

have the optional DVI adapter to connect the cable. If you are connecting two 
flat-panel monitors, at least one of them must have a VGA connector. If you are 
connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.

Connecting Two Monitors With VGA Connectors

1

Shutdown your system.

 

NOTE: 

If your computer has integrated video, do not connect either monitor to the 

integrated video connector. If the integrated video connector is covered by a cap, 
do not remove the cap to connect the monitor or the monitor will not function.

2

Connect one of the monitors to the VGA (blue) connector on the back of 
the computer.

3

Connect the other monitor to the optional DVI adapter and connect the 
DVI adapter to the DVI (white) connector on the back of the computer.

4

Restart your system.

book.book  Page 35  Friday, April 25, 2008  3:58 PM

Summary of Contents for XPS 630









































































































































































Reviews:

No comments