manualshive.com logo in svg

Dell XPS 630, Owner'S Manual, Page: 144 / 168

Share
Download
Dell XPS 630 Owner'S Manual Download Page 144

144

Appendix

The following information is provided on the device or devices covered in this 
document in compliance with the FCC regulations: 

•

Product name: Dell™ XPS™ 630i

•

Model number: DCDR01

•

Company name:
Dell Inc.
Worldwide Regulatory Compliance & Environmental Affairs
One Dell Way
Round Rock, TX 78682 USA
512-338-4400

 

NOTE: 

For further regulatory information, see your 

Product Information Guide

. 

Macrovision

This product incorporates copy protection technology that is protected by 
U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, 
and other intellectual property rights. The use of Macrovision's copy 
protection technology in the product must be authorized by Macrovision. 
Reverse engineering or disassembly is prohibited.

book.book  Page 144  Friday, April 25, 2008  3:58 PM

Summary of Contents for XPS 630









































































































































































Reviews:

No comments